Freescale-semiconductor MPC8260 Bedienungsanleitung Seite 116
- Seite / 136
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Overview
MPC8260 PowerQUICC II Family Reference Manual, Rev. 2
1-22 Freescale Semiconductor
Figure 1-12. PCI Configuration
In this system the local bus is configured as PCI (33-MHz 32-bit data bus version 2.1). The PowerQUICC
II can be configured as a host or as an agent on the PCI bus. The 60x bus and PCI bus are asynchronous;
there is no frequency dependency between the two. The PCI bus is a 3.3-V bus.
1.7.2.5 PCI with 155-Mbps ATM
Figure 1-13 shows the PCI with 155-Mbps ATM configuration (MPC8265 and MPC8266 only).
Figure 1-13. PCI with 155-Mbps ATM Configuration
This system supports PCI and implements a 155-Mbps, full-duplex ATM with more than 128 active
connections. The PowerQUICC II cannot support both functions simultaneously. The local bus is needed
PowerQUICC II
PCI Bus
Communication
Channels
Host or Agent
PHY
60x Bus
SDRAM/SRAM/DRAM/Flash
60x Bus
SDRAM/SRAM/DRAM
Local Bus
SDRAM/SRAM/DRAM
ATM
Connection Tables
PCI Bridge
PCI Bus
PowerQUICC II
Communication
Channels
UTOPIA
PHY
ATM
PHY
- MPC8260 PowerQUICC™ II 1
- Family Reference Manual 1
- How to Reach Us: 2
- Contents 10
- Freescale Semiconductor xlv 47
- Freescale Semiconductor xlvii 49
- Freescale Semiconductor xlix 51
- Freescale Semiconductor li 53
- Freescale Semiconductor liii 55
- Freescale Semiconductor lv 57
- Freescale Semiconductor lvii 59
- Freescale Semiconductor lix 61
- Freescale Semiconductor lxi 63
- Number Title 64
- Freescale Semiconductor lxiii 65
- Freescale Semiconductor lxv 67
- Freescale Semiconductor lxvii 69
- Freescale Semiconductor lxix 71
- Freescale Semiconductor lxxi 73
- Freescale Semiconductor lxxv 77
- About This Book 79
- Table i. Changes to 80
- , Rev. 1 80
- Audience 81
- Organization 81
- Freescale Semiconductor lxxxi 83
- I-4 Freescale Semiconductor 94
- Chapter 1 95
- 1-2 Freescale Semiconductor 96
- Freescale Semiconductor 1-3 97
- 1-4 Freescale Semiconductor 98
- Freescale Semiconductor 1-5 99
- 1.2 Architecture Overview 100
- 1.2.1 G2 Core 101
- 1-8 Freescale Semiconductor 102
- Freescale Semiconductor 1-9 103
- 1.3.1 Signals 104
- Freescale Semiconductor 1-11 105
- 1.5 Serial Protocol Table 106
- 1.6.1 Pin Configurations 107
- 1.6.2 Serial Performance 107
- 1.7 Application Examples 108
- Overview 109
- 1.7.1.4 Cellular Base Station 111
- 1.7.2 Bus Configurations 113
- 1.7.2.4 PCI 115
- 1.7.2.5 PCI with 155-Mbps ATM 116
- 1-24 Freescale Semiconductor 118
- Chapter 2 119
- Freescale Semiconductor 2-3 121
- 2-4 Freescale Semiconductor 122
- 2.2.1 Instruction Unit 123
- 2.2.4.1 Integer Unit (IU) 124
- 2.2.4.3 Load/Store Unit (LSU) 124
- 2.2.5 Completion Unit 125
- 2.3 Programming Model 126
- 2.3.1.1 PowerPC Register Set 127
- 0 1 2 3 4 678910 1112 1415 129
- G2 Core Reference Manual 132
- 2-16 Freescale Semiconductor 134
- 2.4 Cache Implementation 135
- 2.4.1 PowerPC Cache Model 136
- Freescale Semiconductor 2-19 137
- 2.4.2.2 Instruction Cache 138
- 2.4.2.3 Cache Locking 138
- 2.5 Exception Model 139
- G2 Core 140
- Reference Manual 140
- MPC603e User’s Manual 141
- 2.6 Memory Management 143
- 2-26 Freescale Semiconductor 144
- 2.7 Instruction Timing 145
- Chapter 3 147
- Memory Map 147
- Configuration and Reset 171
- Acronyms and Abbreviations 172
- Chapter 4 173
- System Interface Unit (SIU) 173
- 4.1.1 Bus Monitor 175
- 4.1.2 Timers Clock 175
- 4.1.3 Time Counter (TMCNT) 176
- 4.2 Interrupt Controller 179
- 4.2.1 Interrupt Configuration 180
- 4.2.1.2 INT Interrupt 181
- Freescale Semiconductor 4-13 185
- 4.3 Programming Model 189
- FCCs and MCCs 191
- Figure 4-14. SIPNR_H 193
- Figure 4-15. SIPNR_L 194
- Figure 4-16. SIMR_H 195
- Figure 4-17. SIMR_L 195
- 0123456789101112131415 198
- 16 17 18 19 20 21 22 23 24 31 198
- Figure 4-22. PPC_ACR 201
- Figure 4-23. PPC_ALRH 202
- Figure 4-24. PPC_ALRL 203
- Figure 4-25. LCL_ACR 203
- Figure 4-26. LCL_ALRH 204
- Figure 4-27. LCL_ALRL 205
- 4.3.4 PCI Control Registers 220
- 4.4 SIU Pin Multiplexing 221
- Chapter 5 223
- 5.1.1 Reset Actions 224
- 5.1.2 Power-On Reset Flow 224
- 5.1.3 HRESET Flow 225
- 5.1.4 SRESET Flow 225
- 16 25 26 27 28 29 30 31 226
- 5.3 Reset Mode Register (RMR) 227
- 5.4 Reset Configuration 228
- . As Figure 5-7 234
- Freescale Semiconductor 5-13 235
- 5-14 Freescale Semiconductor 236
- Part III 237
- The Hardware Interface 237
- Conventions 238
- Chapter 6 241
- External Signals 241
- 6.2 Signal Descriptions 242
- Table 6-1. External Signals 243
- Chapter 7 257
- 60x Signals 257
- 7.1 Signal Configuration 258
- 7.2 Signal Descriptions 258
- Freescale Semiconductor 7-3 259
- 7.2.1.2 Bus Grant (BG) 260
- 7.2.2.1 Transfer Start (TS) 261
- 7.2.3.1 Address Bus (A[0–31]) 262
- Freescale Semiconductor 7-7 263
- 7.2.4.3 Transfer Burst (TBST) 264
- 7.2.4.4 Global (GBL) 264
- Freescale Semiconductor 7-9 265
- 7.2.5.2 Address Retry (ARTRY) 266
- 7.2.6.1 Data Bus Grant (DBG) 267
- 7.2.7 Data Transfer Signals 268
- Freescale Semiconductor 7-15 271
- 7-16 Freescale Semiconductor 272
- Freescale Semiconductor 7-17 273
- 7-18 Freescale Semiconductor 274
- Chapter 8 275
- The 60x Bus 275
- 8.2 Bus Configuration 276
- 8.2.2 60x-Compatible Bus Mode 277
- 8.3 60x Bus Protocol Overview 278
- 8.3.1 Arbitration Phase 279
- 8-6 Freescale Semiconductor 280
- 8.4 Address Tenure Operations 281
- 8.4.2 Address Pipelining 282
- Regarding Table 8-2: 285
- Table 8-5. Burst Ordering 288
- Figure 8-7. Retry Cycle 297
- 8.4.5 Pipeline Control 298
- 8.5 Data Tenure Operations 299
- 8.5.2 Data Streaming Mode 300
- 8.7 Processor State Signals 305
- 8.8 Little-Endian Mode 306
- Chapter 9 307
- PCI Bridge 307
- 9.1 Signals 309
- 9.2 Clocking 309
- 9.3 PCI Bridge Initialization 309
- 9.4 SDMA Interface 309
- 9.7 60x Bus Masters 310
- 9.9 PCI Interface 311
- 9.9.1 PCI Interface Operation 312
- 9-8 Freescale Semiconductor 314
- 9.9.1.3 Bus Transactions 315
- 9-12 Freescale Semiconductor 318
- 9.9.1.4 Other Bus Operations 319
- 9-14 Freescale Semiconductor 320
- 9-16 Freescale Semiconductor 322
- 9.9.1.5 Error Functions 323
- 9.9.2 PCI Bus Arbitration 325
- 9.9.2.3 Master Latency Timer 326
- 9.10 Address Map 327
- 9.10.2 Address Translation 330
- 9.10.3 SIU Registers 332
- 9.11 Configuration Registers 333
- 9.11.1.1 Message Unit (I 336
- O) Registers 336
- Table 9-6. describes POCMRx 338
- a minimum of 339
- Table 9-16. PITAR 348
- Table 9-17. PIBAR 349
- Table 9-18. describes PICMRx 350
- 9.11.2.1 Vendor ID Register 352
- 9.11.2.2 Device ID Register 353
- (PIMMRBAR) 359
- Table 9-33. GPLABAR 361
- 9.11.2.20 PCI Bus MIN GNT 363
- 9.11.2.21 PCI Bus MAX LAT 364
- Freescale Semiconductor 9-63 369
- 9.12 Message Unit (I 371
- Table 9-46. IMR 372
- 9.12.2 Door Bell Registers 373
- 9.12.3 I 375
- 9.12.3.2 Inbound FIFOs 376
- 9.12.3.3 Outbound FIFOs 380
- 9.12.3.4 I 383
- O Registers 383
- 9.13 DMA Controller 391
- 9.13.1.1 DMA Direct Mode 392
- 9.13.1.2 DMA Chaining Mode 392
- 9.13.1.3 DMA Coherency 393
- 9.13.1.5 DMA Transfer Types 393
- 9.13.1.6 DMA Registers 394
- Table 9-66. DMAMR 395
- IOS interface and before it 395
- Channels 395
- Table 9-67. DMASR 397
- 9.14 Error Handling 403
- 9.14.1.3 PCI Interface 404
- Freescale Semiconductor 9-99 405
- 9.14.1.4 Embedded Utilities 406
- Chapter 10 407
- Clocks and Power Control 407
- 2 (DFBRG + 1) 408
- 10.4.2 Skew Elimination 409
- 10.4.3 PCI Bridge Clocking 409
- 10.5 Clock Dividers 411
- 10.7 PLL Pins 412
- .25µm (HiP4) Silicon 413
- × (PLLDF + 1) – 1 416
- 10.10 Basic Power Structure 417
- 10-12 Freescale Semiconductor 418
- Chapter 11 419
- Memory Controller 419
- 11.1 Features 421
- 11.2 Basic Architecture 422
- 11.2.2 Page Hit Checking 425
- 11-8 Freescale Semiconductor 426
- and LWR) 427
- 11.2.8 Atomic Bus Operation 427
- 11.2.9 Data Pipelining 427
- 11-10 Freescale Semiconductor 428
- Table 11-1. Number of PSDVAL 429
- 11.3 Register Descriptions 430
- 11.3.1 Base Registers (BR 431
- Table 11-4. BR 432
- 11.3.2 Option Registers (OR 433
- Table 11-5. OR 434
- Table 11-6. OR 436
- Figure 11-9. OR 437
- —UPM Mode 437
- )—UPM Mode 437
- Figure 11-11. Machine 444
- Mode Registers (M 444
- MR) (continued) 446
- 11.4 SDRAM Machine 451
- PRECHARGE-ALL-BANKS command 453
- CBR REFRESH commands 453
- 11.4.5 Bank Interleaving 455
- Freescale Semiconductor 11-39 457
- 11-40 Freescale Semiconductor 458
- Freescale Semiconductor 11-41 459
- Figure 11-26. EAMUX = 1 460
- 11.4.7 SDRAM Interface Timing 461
- 11-44 Freescale Semiconductor 462
- Freescale Semiconductor 11-45 463
- 11-46 Freescale Semiconductor 464
- 11.4.10 SDRAM Refresh 465
- 11.4.11 SDRAM Refresh Timing 466
- ACTIVATE Command 467
- READ/WRITE Command 467
- 11.5.1 Timing Configuration 471
- 11.5.1.3 Relaxed Timing 474
- [29–30] = 00, Fastest Timing) 477
- [29–30] = 01) 478
- [29–30] = 10) 479
- 11.6.1 Requests 482
- RUN commands (MxMR[OP] 483
- RUN Command 485
- 11.6.4 The RAM Array 487
- 11.6.4.1 RAM Words 488
- Table 11-37. M 494
- MR Loop Field Usage 494
- 11.6.4.4 Signals Negation 496
- 11.6.4.5 The Wait Mechanism 496
- ACTIVATE command 498
- Figure 11-74. Exception Cycle 507
- 11-90 Freescale Semiconductor 508
- 11.8.2 Slow Devices Example 519
- SDRAM, BADDR is not needed 523
- Chapter 12 525
- Secondary (L2) Cache Support 525
- 12.1.2 Write-Through Mode 526
- Freescale Semiconductor 12-3 527
- 12.1.3 ECC/Parity Mode 528
- Freescale Semiconductor 12-5 529
- 12.4 L2 Cache Operation 531
- 12.5 Timing Example 531
- Chapter 13 533
- IEEE 1149.1 Test Access Port 533
- 13.2 TAP Controller 534
- 13.3 Boundary Scan Register 535
- 13.4 Instruction Register 537
- 13.6 Nonscan Chain Operation 539
- 13-8 Freescale Semiconductor 540
- Intended Audience 541
- IV-2 Freescale Semiconductor 542
- Suggested Reading 543
- Architecture Documentation 543
- IV-8 Freescale Semiconductor 548
- Chapter 14 549
- 14-2 Freescale Semiconductor 550
- 14.3.2 Features 552
- 14.3.3 CP Block Diagram 553
- 14.3.4 G2 Core Interface 554
- 14.3.5 Peripheral Interface 555
- 14.3.6 Execution from RAM 556
- 14.4 Command Set 560
- 0 1 5 6 10 11 15 561
- 16 17 18 25 26 27 28 31 561
- 14.4.1.1 CP Commands 562
- 14.5 Dual-Port RAM 565
- 14.5.2 Parameter RAM 568
- Table 14-10. Parameter RAM 569
- 14.6 RISC Timer Tables 570
- 012 11 12 15 572
- SET TIMER Command 573
- SET TIMER command 574
- Freescale Semiconductor 14-27 575
- 14-28 Freescale Semiconductor 576
- Chapter 15 577
- Figure 15-1. SI Block Diagram 578
- 15.1 Features 579
- 15.2 Overview 580
- Freescale Semiconductor 15-7 583
- 15.4 Serial Interface RAM 584
- 15.4.3 Programming SI 586
- RAM Entries 586
- Table 15-1. SI 587
- RAM Entry (MCC = 0) 587
- Table 15-2. SI 589
- RAM Entry (MCC = 1) 589
- 15.4.4 SI 590
- RAM Programming Example 590
- Freescale Semiconductor 15-15 591
- Figure 15-9. Example: SI 592
- RAM Size 592
- 15.5.2 SI Mode Registers (SI 593
- Table 15-5. SI 594
- MR Field Descriptions 594
- FSD = 01 597
- FSD = 00 598
- 15.5.3 SI 599
- 0 1 3 4 5 7 8 9 11 12 13 15 600
- 15.6.1 IDL Interface Example 602
- Figure 15-23. IDL Bus Signals 604
- Table 15-10. SI 605
- Figure 15-24. GCI Bus Signals 607
- Table 15-11. GCI Signals 607
- 15-32 Freescale Semiconductor 608
- 15.7.2.2 SCIT Programming 609
- 15-34 Freescale Semiconductor 610
- Chapter 16 611
- CPM Multiplexing 611
- 16.1 Features 612
- Freescale Semiconductor 16-3 613
- 16.3 NMSI Configuration 614
- Figure 16-3. Bank of Clocks 615
- 16.4 CMX Registers 617
- 16-10 Freescale Semiconductor 620
- Chapter 17 631
- Baud-Rate Generators (BRGs) 631
- Table 17-1. BRGC 633
- 17.3 UART Baud Rate Examples 635
- BRGCx[CD] = 389 636
- Chapter 18 637
- 18-2 Freescale Semiconductor 638
- 18.2.1 Cascaded Mode 639
- 0 7 8 9 10 11 12 13 14 15 642
- 0 13 14 15 644
- Chapter 19 645
- 19-2 Freescale Semiconductor 646
- 19.2 SDMA Registers 647
- 19.3 IDMA Emulation 649
- 19.4 IDMA Features 649
- 19.5 IDMA Transfers 650
- 19.5.1.2 Normal Mode 653
- 19-10 Freescale Semiconductor 654
- Freescale Semiconductor 19-11 655
- 19-12 Freescale Semiconductor 656
- 19.6 IDMA Priorities 657
- 19.7 IDMA Interface Signals 657
- 19.7.1.1 Level-Sensitive Mode 658
- 19.7.2 DONE 659
- 19.8 IDMA Operation 660
- 19.8.2 IDMA 661
- Parameter RAM 661
- Table 19-4. IDMA 662
- DCM is undefined at reset 663
- (DMA_WRAP) 664
- 19.8.3 IDMA Performance 667
- 19.8.5 IDMA BDs 668
- START_IDMA Command 671
- STOP_IDMA Command 672
- START_IDMA command is issued 674
- (on 60x)–IDMA3 676
- (PCI-to-60x)—IDMA1 677
- (on 60x)–IDMA3 (continued) 677
- Chapter 20 679
- 20.1 Features 680
- Figure 20-3 shows GSMR_L 683
- 20.3 SCC Parameter RAM 691
- 20.3.1 SCC Base Addresses 692
- Table 20-6. RFCR 693
- Table 20-7. SCC 694
- 20.3.4 Initializing the SCCs 695
- 20.3.7 Reconfiguring the SCCs 702
- 20.3.8 Saving Power 703
- 20-26 Freescale Semiconductor 704
- Chapter 21 705
- SCC UART Mode 705
- 21.1 Features 706
- 21.2 Normal Asynchronous Mode 706
- 21.3 Synchronous Mode 707
- 21.4 SCC UART Parameter RAM 707
- 21.7 SCC UART Commands 710
- 21.10 Hunt Mode (Receiver) 713
- STOP TRANSMIT command. The 714
- Table 21-8. Reception Errors 716
- Freescale Semiconductor 21-15 719
- Chapter 22 729
- SCC HDLC Mode 729
- 22.4 SCC HDLC Parameter RAM 731
- 22.6 SCC HDLC Commands 733
- Table 22-4. Transmit Errors 734
- Table 22-5. Receive Errors 734
- RxBDs are used in receiving 737
- Freescale Semiconductor 22-15 743
- 22-16 Freescale Semiconductor 744
- 22.15.1 HDLC Bus Features 746
- 22.15.4 Delayed RTS Mode 748
- L1RXD CTSL1TXD 749
- 22-22 Freescale Semiconductor 750
- Chapter 23 751
- SCC BISYNC Mode 751
- 23.1 Features 752
- 23.4 SCC BISYNC Parameter RAM 753
- 23.5 SCC BISYNC Commands 754
- Table 23-2. Transmit Commands 755
- Table 23-3. Receive Commands 755
- Transmit Errors 760
- Receive Errors 760
- Figure 23-6. SCC BISYNC RxBD 762
- RESET BCS 767
- Freescale Semiconductor 23-19 769
- 23-20 Freescale Semiconductor 770
- Chapter 24 771
- SCC Transparent Mode 771
- 24-2 Freescale Semiconductor 772
- 24.4.3 End of Frame Detection 775
- 24.7 SCC Transparent Commands 776
- Table 24-4. Receive Commands 777
- Table 24-5. Transmit Errors 777
- Table 24-6. Receive Errors 778
- Descriptions 779
- Freescale Semiconductor 24-13 783
- 24-14 Freescale Semiconductor 784
- Chapter 25 785
- SCC Ethernet Mode 785
- 25.2 Features 786
- Freescale Semiconductor 25-3 787
- 25-6 Freescale Semiconductor 790
- 25.9 SCC Ethernet Commands 793
- Table 25-2. Transmit Commands 794
- Table 25-3. Receive Commands 794
- 25.11 Hash Table Algorithm 796
- 25.12 Interpacket Gap Time 796
- 25.13 Handling Collisions 796
- Ethernet mode register 798
- 25.18 SCC Ethernet Receive BD 800
- 25-22 Freescale Semiconductor 806
- Freescale Semiconductor 25-23 807
- 25-24 Freescale Semiconductor 808
- Chapter 26 809
- SCC AppleTalk Mode 809
- 26.2 Features 810
- 26.3 Connecting to AppleTalk 810
- 26.4.1 Programming the GSMR 811
- 26.4.2 Programming the PSMR 812
- 26.4.3 Programming the TODR 812
- Chapter 27 813
- 27.1 Features 814
- 27.2.3 SMC Parameter RAM 817
- CLOSE RXBD command 819
- 27.2.4.5 Switching Protocols 821
- 27.3 SMC in UART Mode 822
- 27.3.1 Features 823
- 27.3.6 Sending a Break 824
- 27.3.7 Sending a Preamble 825
- 27.3.9 SMC UART RxBD 825
- Figure 27-6. SMC UART RxBD 826
- Figure 27-7. RxBD Example 828
- 27.3.10 SMC UART TxBD 829
- Freescale Semiconductor 27-19 831
- 27.4 SMC in Transparent Mode 832
- Freescale Semiconductor 27-21 833
- 27-22 Freescale Semiconductor 834
- ENTER HUNT MODE 836
- 27.4.8 SMC Transparent RxBD 838
- 27.4.9 SMC Transparent TxBD 839
- 27.5 The SMC in GCI Mode 842
- 27.5.4 SMC GCI Commands 844
- 0123 78 15 845
- 01 78 131415 846
- 27-36 Freescale Semiconductor 848
- Chapter 28 849
- 28.1 MCC Operation Overview 850
- 28.2 Global MCC Parameters 852
- Figure 28-2. TSTATE High Byte 855
- Figure 28-3. INTMSK Mask Bits 856
- 28.3.1.1 860
- 28.3.2.2 860
- 0 12345678910111213 15 861
- 28.3.1.4 862
- Figure 28-7. INTMSK Mask Bits 863
- 28-18 Freescale Semiconductor 866
- 0 3 4 5 6 7 8 9 10 11 12 15 872
- Figure 28-11. Mask1 Format 874
- Figure 28-12. Mask2 Format 874
- Freescale Semiconductor 28-27 875
- 28.4 Channel Extra Parameters 876
- 28.5 Superchannels 877
- 28-30 Freescale Semiconductor 878
- 28.7 MCC Commands 882
- 28.8 MCC Exceptions 883
- 0 1 2 3 4 5 6 7 8 1112 131415 885
- Freescale Semiconductor 28-41 889
- 28.9 MCC Buffer Descriptors 891
- Invalid data 893
- 28-48 Freescale Semiconductor 896
- Freescale Semiconductor 28-49 897
- 28-50 Freescale Semiconductor 898
- Chapter 29 899
- 29-2 Freescale Semiconductor 900
- 29.6 FCC Buffer Descriptors 907
- + 0 Status and Control 908
- 29.7 FCC Parameter RAM 909
- 29.8 Interrupts from the FCCs 912
- 29.9 FCC Initialization 913
- 29.10 FCC Interrupt Handling 914
- 29.11 FCC Timing Control 915
- Figure 29-10. CTS Lost 917
- Freescale Semiconductor 29-21 919
- 29.13 Saving Power 920
- Chapter 30 921
- ATM Controller and 921
- AAL0, AAL1, and AAL5 921
- 30-2 Freescale Semiconductor 922
- Freescale Semiconductor 30-3 923
- 30.2 ATM Controller Overview 924
- 30.2.1 Transmitter Overview 925
- 30.2.2 Receiver Overview 926
- Freescale Semiconductor 30-7 927
- 30.2.3 Performance Monitoring 928
- 30.2.4 ABR Flow Control 928
- Max bit rate = 930
- 30.3.5 ATM Traffic Type 931
- Freescale Semiconductor 30-13 933
- 30.4.1 External CAM Lookup 934
- 30.4.2 Address Compression 935
- 30.4.3 Misinserted Cells 938
- 30.4.4 Receive Raw Cell Queue 938
- 30.5.1 The ABR Model 940
- 30.5.1.3 ABR Flowcharts 941
- 30.5.2 RM Cell Structure 945
- 012 67 15 946
- 30.6 OAM Support 947
- 30.6.6 Performance Monitoring 949
- 30.6.6.2 PM Block Monitoring 950
- 30.6.6.3 PM Block Generation 951
- 30.7 User-Defined Cells (UDC) 952
- 30.8 ATM Layer Statistics 953
- 30.9 ATM-to-TDM Interworking 953
- 30.9.3 Timing Issues 955
- 30.9.6 CAS Support 955
- 30.10 ATM Memory Structure 956
- 30.10.2.1 ATM Channel Code 961
- + 0x0E TML 966
- Freescale Semiconductor 30-51 971
- 30-52 Freescale Semiconductor 972
- 0 7 8 9 10 11 12 15 977
- — 0 CR10 — ACHC — 977
- + 0x12 — 977
- 30.10.4 APC Data Structure 983
- 30.10.4.2 APC Priority Table 985
- Figure 30-40. Control Slot 986
- Buffer 3 of FBP1 989
- Free Buffer Pool 1 989
- 01234 15 990
- 30.10.5.4 AAL5 RxBD 991
- 30.10.5.5 AAL1 RxBD 993
- 30.10.5.6 AAL0 RxBD 994
- 30.10.5.7 AAL1 CES RxBD 995
- 30.10.5.8 AAL2 RxBD 995
- 30.10.5.10 AAL5 TxBDs 996
- 30.10.5.11 AAL1 TxBDs 997
- 30.10.5.12 AAL0 TxBDs 998
- 30.10.5.13 AAL1 CES TxBDs 999
- 30.10.5.14 AAL2 TxBDs 1000
- 30.11 ATM Exceptions 1001
- 30.11.2 Interrupt Queue Entry 1002
- Name Description 1003
- 30.12 The UTOPIA Interface 1004
- 30.13 ATM Registers 1007
- 0 3 4 7 8 9 10 11 15 1008
- (FCC1 and FCC2 Only) 1011
- Table 30-49. FTIRR 1012
- Field Descriptions 1012
- 30.14 ATM Transmit Command 1013
- 30.16.2 APC Configuration 1016
- 30.16.3 Buffer Configuration 1016
- Chapter 31 1017
- 31-2 Freescale Semiconductor 1018
- 31.2.1 Data Path 1019
- 31.2.2 Signaling Path 1019
- Freescale Semiconductor 31-5 1021
- 31.4 Interworking Functions 1022
- 31.4.1.1 ATM-to-TDM 1023
- 31.4.1.2 TDM-to-ATM 1023
- 31.4.2 Timing Issues 1024
- Freescale Semiconductor 31-9 1025
- 31.4.5 Trunk Condition 1026
- 31.4.7.1 CAS Routing Table 1028
- Freescale Semiconductor 31-15 1031
- 31.6 3-Step-SN Algorithm 1036
- 31.8 AAL-1 Memory Structure 1038
- (RCT, TCT) 1041
- Bits Name Description 1043
- + 0x16 Block Size 1045
- 01234567 8 91011 12 131415 1047
- command is needed, which 1048
- command. When the host 1048
- 31.11 Buffer Descriptors 1052
- TBD_Base 1053
- Pointers 1053
- 31.12 ATM Controller Buffers 1054
- Figure 31-28. AAL1 CES RxBD 1055
- 31.12.2 AAL1 CES TxBDs 1056
- 31.13 AAL1 CES Exceptions 1057
- Figure 31-31 1058
- ATM_CHANNEL# × 8 1059
- Width Description 1060
- 31-46 Freescale Semiconductor 1062
- Chapter 32 1063
- ATM AAL2 1063
- 32.2 Features 1065
- 32-4 Freescale Semiconductor 1066
- 32.3 AAL2 Transmitter 1067
- 32.3.2.1 Round Robin Priority 1068
- 32.3.2.2 Fixed Priority 1068
- 32.3.4 No STF Mode 1070
- 32-10 Freescale Semiconductor 1072
- Field Descriptions 1073
- 32.3.5.3 CPS Buffer Structure 1077
- Figure 32-9. CPS TxBD 1078
- Figure 32-12. SSSAR TxBD 1081
- 32.4 AAL2 Receiver 1082
- Freescale Semiconductor 32-21 1083
- 32.4.3 AAL2 Switching 1084
- Figure 32-14. AAL2 Switching 1085
- 32.5 AAL2 Parameter RAM 1097
- 32.7 AAL2 Exceptions 1100
- Chapter 33 1103
- 33.1.1 References 1105
- 33.1.2 IMA Versions Supported 1105
- 33.2 IMA Protocol Overview 1106
- 33.2.2 IMA Frame Overview 1107
- 33.2.3 Overview of IMA Cells 1109
- 33.2.3.2 IMA Filler Cells 1112
- 33.3.2 Transmit Architecture 1113
- 33.3.2.1 TRL Operation 1114
- 33.3.2.2 Non-TRL Operation 1115
- 33.3.3 Receive Architecture 1119
- 33-18 Freescale Semiconductor 1120
- Cell Reception Task 1121
- 33-20 Freescale Semiconductor 1122
- Freescale Semiconductor 33-21 1123
- 33-22 Freescale Semiconductor 1124
- Freescale Semiconductor 33-23 1125
- 33.4 IMA Programming Model 1126
- 1MByte Boundary 1127
- External memory 1127
- (Local or 60x Bus) 1127
- 33.4.2 IMA FCC Programming 1128
- 33.4.3 IMA Root Table 1129
- Table 33-3. IMA Root Table 1130
- (continued) 1130
- 33.4.4 IMA Group Tables 1131
- Name Width Description 1132
- 0 234567 1133
- 01234567 1134
- Table 33-9. ICP Cell Template 1135
- 33.4.5 IMA Link Tables 1143
- 012345 7 1144
- 0 12 3 4567 1149
- 8 9 10 11 12 13 14 15 1149
- 33.4.6.1 Transmit Queues 1150
- 33.4.7 IMA Exceptions 1151
- 33-50 Freescale Semiconductor 1152
- OFFSET + 2 L/G NUM 1152
- 33.4.8 IDCR Timer Programming 1154
- Freescale Semiconductor 33-53 1155
- 33.4.8.3 IDCR_Init Command 1156
- 33.4.8.4 IDCR Root Parameters 1156
- 33.4.8.5 IDCR Table Entry 1156
- 33.4.8.7 IDCR Events 1157
- 33.4.9.2 Programming for ABR 1159
- 33.4.10 Changing IMA Version 1160
- 33.5.1 Software Model 1160
- 33.5.3.1 System Definition 1161
- 33.5.3.2 General Operation 1162
- 33.5.3.10 Failure Alarms 1163
- 33.5.3.13 SNMP MIBs 1164
- Freescale Semiconductor 33-63 1165
- 33-64 Freescale Semiconductor 1166
- 33-66 Freescale Semiconductor 1168
- Freescale Semiconductor 33-67 1169
- 33-68 Freescale Semiconductor 1170
- Freescale Semiconductor 33-69 1171
- 33-70 Freescale Semiconductor 1172
- Freescale Semiconductor 33-71 1173
- 33-72 Freescale Semiconductor 1174
- 33.5.4.12 IDCR Operation 1175
- 33-74 Freescale Semiconductor 1176
- 33.5.4.13.2 Receive 1177
- 33-76 Freescale Semiconductor 1178
- Chapter 34 1179
- 34-2 Freescale Semiconductor 1180
- 34.2 Functionality 1181
- 34-4 Freescale Semiconductor 1182
- PowerQUICC II 1182
- 34.3 Signals 1185
- 0 1 23456789101112131415 1186
- Table 34-3. CDSMR 1187
- Table 34-4. TCER 1188
- 012345678 15 1189
- 34.4.3 TC Layer Cell Counters 1190
- 34.4.4 Programming FCC2 1191
- 34.5 Implementation Example 1193
- Table 34-8. Enable FCC2 1195
- Chapter 35 1197
- Fast Ethernet Controller 1197
- 35.2 Features 1198
- Freescale Semiconductor 35-3 1199
- GRACEFUL STOP 1201
- RESTART TRANSMIT 1202
- 35.6 Flow Control 1203
- 35.7 CAM Interface 1203
- 35.8 Ethernet Parameter RAM 1204
- 35.9 Programming Model 1207
- 35.10 Ethernet Command Set 1207
- Table 35-3. Transmit Commands 1208
- Table 35-4. Receive Commands 1208
- 35.11 RMON Support 1209
- 35.13 Hash Table Algorithm 1212
- 35.14 Interpacket Gap Time 1213
- 35.15 Handling Collisions 1213
- 35.18 Fast Ethernet Registers 1214
- 35.19 Ethernet RxBDs 1218
- 35.20 Ethernet TxBDs 1221
- 35-28 Freescale Semiconductor 1224
- Chapter 36 1225
- FCC HDLC Controller 1225
- STOP TRANSMIT command 1226
- RESTART TRANSMIT command, it 1226
- GRACEFUL 1226
- 36.4 HDLC Parameter RAM 1227
- 36.5 Programming Model 1229
- 36.5.2 HDLC Error Handling 1230
- Figure 36-3 1231
- “Parallel I/O Ports.” 1240
- 36-18 Freescale Semiconductor 1242
- Chapter 37 1243
- FCC Transparent Controller 1243
- Freescale Semiconductor 37-3 1245
- Chapter 38 1247
- 38-2 Freescale Semiconductor 1248
- 38-4 Freescale Semiconductor 1250
- — 0_0000_0000 1252
- (SPMODE[CP] = 1) 1253
- NOTE: Q = Undefined Signal 1254
- 38.5 SPI Parameter RAM 1256
- 38.6 SPI Commands 1258
- INIT RX 1259
- PARAMETERS 1259
- Figure 38-11. SPI RxBD 1260
- Figure 38-12 1261
- Freescale Semiconductor 38-17 1263
- 38-18 Freescale Semiconductor 1264
- Chapter 39 1265
- C Controller 1265
- 39.1 Features 1266
- C Controller Transfers 1266
- 39.3.1 I 1267
- C Master Write (Slave Read) 1267
- 39.3.2 I 1268
- C Loopback Testing 1268
- 39.3.3 I 1268
- C Master Read (Slave Write) 1268
- 39.3.4 I 1269
- C Multi-Master Considerations 1269
- C Registers 1270
- 39.4.3 I 1271
- 39.4.4 I 1271
- 39.4.5 I 1272
- C Command Register (I2COM) 1272
- C Parameter RAM 1273
- Figure 39-11. I 1274
- Table 39-6. I 1274
- C Commands 1275
- 39.7 The I 1275
- 39.7.1 I 1276
- C Buffer Descriptors (BDs) 1276
- 39.7.1.2 I 1277
- Table 39-10 describes I 1278
- Chapter 40 1279
- Parallel I/O Ports 1279
- Table 40-1. PODR 1280
- 40.3 Port Block Diagram 1283
- 40.4 Port Pins Functions 1284
- 40.5 Ports Tables 1285
- 40.6 Interrupts from Port C 1297
- 40-20 Freescale Semiconductor 1298
- Appendix A 1299
- A.3 MPC8260-Specific SPRs 1301
- A-4 Freescale Semiconductor 1302
- Appendix B 1303
- B-4 Freescale Semiconductor 1306
- Freescale Semiconductor B-7 1309
- 66MHz 53 8×()×() 1313
- 155.52Mbps 1313
- 30 with the 1314
- B-14 Freescale Semiconductor 1316
- B-16 Freescale Semiconductor 1318
- See also 1320
- Numerics 1329
- A–A Index 1330
- ATM TRANSMIT command, 30-93 1330
- Index B–B 1331
- C–C Index 1332
- Index C–C 1333
- D–D Index 1336
- Index E–F 1337
- G–H Index 1338
- I–I Index 1340
- Index J–M 1341
- M–M Index 1342
- Index N–P 1343
- P–P Index 1344
- Index P–P 1345
- R–R Index 1346
- Index R–R 1347
- S–S Index 1350
- Index S–S 1351
- Index T–T 1353
- U–U Index 1354
- Index U–U 1355
Verwandte Produkte und Handbücher für Hardware Freescale-semiconductor MPC8260
(262 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.114 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern